Drawer Corner Lock Router Bit

Cheap Drawer Corner Lock Router Bit Review

Drawer Corner Lock Router Bit Feature

• K10 and K20 grade carbide for clean cutting action
• Final sharpening with 600 - 800 grit diamond wheels
• Precision balanced for smooth operation
• Baked-on anti-stick coating to reduce pitch and resin buildup
• 100% satisfaction guarantee!

Drawer Corner Lock Router Bit Overview

Top quality router bits that meet the high standards of Rockler
Woodworking and Hardware. These bits are competitively priced while
offering high performance and long life. If you are not 100% satisfied with these bits, send them back for a refund.

Drawer corner lock bit is designed especially for joining drawer sides to drawer fronts. These larger bits are intended to be used
in a router table. Set up jig available (Rockler# 53810).

Major Cut Diameter: 1"
Minor Cut Diameter: 3/4"
Major Cut Height: 1/2"
Minor Cut Height: 5/32"
Shank Diameter: 1/2"
Shank Length: 1-1/2"


Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions:
1) Rockler recommends using 1/2" shank router bits whenever possible.
1/2" shanks provide better stability with less vibration to
produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it
back out 1/16" to 1/8".
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router;
then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations.



*** Product Information and Prices Stored: May 26, 2010 21:18:44