Porter-Cable 893PK 2-1/4-Horsepower Fixed- and Plunge-Base Kit

Cheap Porter-Cable 893PK 2-1/4-Horsepower Fixed- and Plunge-Base Kit Review

I purchased the Porter-Cable 893PK package here on Amazon.Com and couldn't be happier. My main project that I purchased it for was a rather complicated loudspeaker design involving lots of templates, MDF, solid cherry, veneer, etc. I can say that my expectations have been greatly exceeded. Combined with good bits, the PC has produced wonderful results. I have used both bases and I'm impressed by how smoothly and quickly the bases can be switched out. The soft-start feature is really nice because there is really no kick back, despite such a powerful motor. The clear base makes template work go very smoothly. I also used the unit for trimmning veneer edges with excellent and precise results. Recently, I used the router to trim sheathing on a shed project and was amazed at how quickly this unit and a 1/2 x 3" straight cutting bit could trim the edges on 8' ply and OSB panels, giving perfect edges on the shed cladding. Another feature that I think is really cool is the built-in dust extraction system on the plunge base. While cutting down a bunch of MDF using a template, I noted a huge amount of fine dust produced by the router. Then, I read the manual and discovered how to use the dust extractor with my ShopVac. This was very effective in eliminating most of the dust, although it required frequent cleaning of the ShopVac filter. MDF dust is probably the worst for clogging ShopVac filters. A true dust collection system would help here. Overall, I think this is a very capable router package and one that will likely serve me for years of wooodworking projects. Yes, this is a bit more expensive than other offerings, but the feeling of quality was evident the first time I opened up the package. I think the extra expense is well worth it.

Porter-Cable 893PK 2-1/4-Horsepower Fixed- and Plunge-Base Kit Feature

• Efficient, low-noise motor with superior electronic feedback and variable speed to maintain power
• Built-in dust collection for improved visibility
• Simply move the lever to make large or coarse adjustments
• Weighs 21.8 pounds
• Comes with carrying case, transparent sub-base, 1/4-and 1/2-inch self-releasing collets, a wrench, and an instructional CD-Rom

Porter-Cable 893PK 2-1/4-Horsepower Fixed- and Plunge-Base Kit Overview

Fast, smooth, and efficient, the Porter-Cable 893PK gets its formidable strength from a 2-1/4 HP, super-quiet motor with superior electronic feedback and variable speed (10 - 23,000 RPM) to maintain consistent power and control. A built-in dust collection system helps improve visibility, while an easy-to-use knob makes it a snap to fine tune the height; there's also a bypass control to handle both large and coarse adjustments. The 893PK works with most 890 and 690 router series bases and also boasts machined brass post busing for durability. For added convenience, both the fixed and plunge bases lock or release instantly with a simple finger movement. Best of all, you don't have to crawl under the table and fiddle with screws to make adjustments--you can re-position right from the tabletop. The 893PK comes with a carrying case, transparent sub-base, 1/4-and 1/2-inch self-releasing collets, a wrench, and a helpful CD-Rom with clear and precise instructions on constructing your own router table.



*** Product Information and Prices Stored: Jul 02, 2010 08:19:01